RPI-HT 0.01% Digital Pressure Indicator

6 Digits Resolution
LCD Graphic Display
Multi-Engineering Units Selection
Media Compatibility: Liquid or Gas compatible Liquid or Gas compatible with 316 S

Range	Pneumatic -1 to 2 / 10 / 25/ 35 / 40 / 60 bar Hydraulic 0 to 70 / 100 / 200 / 350 / 700 bar
Accuracy	0.01% FS
Display	LCD Graphic Module
Engineering Units	psi, ba, kg/cm2, kPa, Mpa, mbar, inHg, inH20@4C, inH20@20C, mmH20@4C(<300psi), mmH20@20C(<300psi), inHg, pa(<100psi)
Process Connection	1/4″ NPT (M)
Media Compatibility	Liquid or Gas compatible with 316 SS
Warm Up Time	Pneumatic 5 minutes; Hydraulic 15 Minutes
Operating Temperature	-10 to 55°C
Charge per Operating Hours	4 hours per charge, 72 hours continuously use
Battery	7.4 Vdc @ 2AH Li-ion Battery
Over Pressure Alarm	120% & Flashing display
Temperature Compensation	0 – 50 °C (5 mins to rated accuracy)
Housing	Stainless steel, meets NEMA 4/I P65
Switch Input	Non Voltage Input, N.O or N.C type Display “OPEN” or “CLOSE” switch status

Pressure Indicator
Battery Charger/ Adaptor
Carrying Case
Instruction Manual
Calibration Certificates are issued in Accordance with our Scope as
granted by NABL per ISO/IEC 17025:2017 Standards