Differential Pressure Manometer instruments- Nagman

DPM

Ideal Lab / Site Tool for checking & Calibration of Pneumatic Pressure /
Differential Pressure Gauges / Switches / Transmitters / Receiver Gauges / Loops etc.
Ranges 0 to 25 mbar / 70 mbar / 200 mbar / 300 mbar / 500 mbar / 1000 mbar / 2000 mbar
Accuracy
- ±0.2% F.S. (25 / 70 mbar)
- ±0.1% F.S. (200 / 300 / 500 mbar)
- ±0.05% F.S. (1000 / 2000 mbar)
Display Resolution Minimum 5 digits
Display 7 Segment FSTN (Large) Display
Engineering Units Refer Table below
mA Input 0 to 50 mA DC
Volt Input 0 – 10V
Resolution for mA & Volt 0.001
Over Pressure Alarm 105% FS (Audio / Visual)
Battery Type 7.4 Volts Rechargeable Battery

Range (bar)	Pressure / Engineering Units – Resolution
Range (bar)	inH₂O	mH₂O	cmH₂O	mmH₂O	inHg	mmHg	Mbar	kPa	Mpa	bar	Kg/cm²	psi
25	0.001	0.0001	0.001	0.01	0.0001	0.001	0.001	0.0001	0.0001	0.0001	0.0001	0.0001
70	0.001	0.0001	0.001	0.01	0.0001	0.001	0.001	0.0001	0.0001	0.0001	0.0001	0.0001
200	0.001	0.0001	0.01	0.1	0.0001	0.01	0.01	0.001	0.0001	0.0001	0.0001	0.0001
300	0.01	0.0001	0.01	0.1	0.0001	0.01	0.01	0.001	0.0001	0.0001	0.0001	0.0001
500	0.01	0.0001	0.01	0.1	0.001	0.01	0.01	0.001	0.0001	0.0001	0.0001	0.0001
1000	0.01	0.001	0.1	1	0.001	0.01	0.1	0.01	0.0001	0.0001	0.0001	0.001
2000	0.01	0.001	0.1	1	0.001	0.1	0.1	0.01	0.0001	0.0001	0.0001	0.001

Matching Pneumatic Hand Pump with Vernier
‘Calpress’ Calibration Software with Cable
Calibration Certificates are issued in Accordance with our Scope
as granted by NABL per ISO/IEC 17025:2017 Standards
Set of Adaptors
- BSP
  ⅛” BSP(F) X ¼” BSP (M)
  ½” BSP(F) X ¼” BSP (M)
  ⅜” BSP(F) X ¼” BSP (M)
- NPT
  ⅛” NPT(F) X ¼” BSP (M)
  ¼” NPT(F) X ¼” BSP (M)
  ½” NPT(F) X ¼” BSP (M)
  ⅜” NPT(F) X ¼” BSP (M)