Economy Pressure Indicators - Nagman Instruments Consortium

Pneumatic

MPCE-I-P

Digital Pressure Indicator
Silicon Keys
Selectable Engineering Pressure Units
DC Current Measurement
Switch Test capability & Zero Offset facility
Pressure Transducer – all Media compatible with SS316
Low Battery Indication
Auto Power Off
Rugged Protection Holster
Ingress Protection Rating : IP 52

Specifications

Ideal Lab / Site Tool for checking & Calibration of Pneumatic Pressure / Differential Pressure Gauges / Switches / Transmitters / Receiver Gauges etc.

Ranges: -1 to 2 / 10 / 20 / 35 / 40 / 60 bar
Accuracy: ±0.1% F.S.
Display Resolution: Minimum 4½ digits
Display: 7 Segment FSTN (Large) Display
Engineering Units (12): Refer Table below
mA Input: 0 to 25 mA DC (Active)
Process Connection: ½” BSP (M)
Over Pressure Alarm: 105% FS (Audio / Visual)
Battery Type: 9 Volts Alkaline

7 Segment Classification of Engineering Units

Range (bar)	Pressure / Engineering Units – Resolution
Range (bar)	inH₂O	mH₂O	cmH₂O	mmH₂O	inHg	mmHg	Mbar	kPa	Mpa	bar	Kg/cm²	psi
2	0.1	0.01	1	1	0.001	0.1	1	0.1	0.001	0.001	0.001	0.01
10	1	0.1	1	—	0.1	1	1	1	0.001	0.001	0.001	0.01
20 ~ 35	1	0.1	—	—	0.1	—	1	1	0.001	0.01	0.01	0.1
40	1	0.1	—	—	1	—	—	1	0.001	0.01	0.01	0.1
60	1	0.1	—	—	0.1	—	—	1	0.001	0.01	0.01	0.1

Std. Inclusions

Pressure Indicator
Test Leads & Seals Kit
9V Alkaline Battery
Traceable Calibration Certificate
Instruction Manual

Optional

Hand Pump + Hose with End Fittings
Quick Coupling
USB Interface
Rechargeable Battery with External Charger
‘Calpress’ Calibration Software with Cable
Calibration Certificates are issued in Accordance with our Scope as granted by NABL per ISO/IEC 17025:2017 Standards
Carrying Case
Set of Adaptors
BSP:
⅛” BSP(F) X ¼” BSP (M)
½” BSP(F) X ¼” BSP (M)
⅜” BSP(F) X ¼” BSP (M)
NPT;
⅛” NPT(F) X ¼” BSP (M)
¼” NPT(F) X ¼” BSP (M)
½” NPT(F) X ¼” BSP (M)
⅜” NPT(F) X ¼” BSP (M)