Loop Calibrator with Hart| Nagman 43H Hart Calibrators

Nagman® 43H

Hart communicators provide the tool for communicating with process instruments.
Relying on an open communications protocol, Hart communicators interface with
Hart enabled ‘master’ and ‘field’ devices making it much easier to configure and
calibrate instruments as well as diagnose issues before they collapse.
Support Hart general instructions and general application instructions. Able to read
the device basic information, perform diagnostic testing and calibration to fine tune
the most Hart transmitter, can store up to 20 Hart device configuration file.
Display 3.2 inch TFT color display
Power supply 4×1.5V AA Alkaline battery / adapter
Size (LxBxH) 206 × 97 × 60 mm
Weight (approx.) 600g

Source Mode	Parameters
	DC Current (DC mA)	Ranges	0.000 ~ 22.000mA

		Accuracy ± % of the set value+% of range)	0.01% + 0.015%

		Resolution	1 µA

	Analog Transmitter (Simulate)	Ranges	0.000 ~ 22.000mA

		Accuracy ± % of the set value+% of range)	0.01% + 0.015%

		Resolution	1 µA

		External power supply	5 ~28V

Measurement Mode	Parameters
	DC voltage (DC V)	Ranges	-2.000 ~ 28.000V

		Accuracy ± (% of Reading + % of Range)	0.01% + 0.01%

		Resolution	1 mV

	DC Current (DC mA)	Ranges	-4.000 ~ 33.000mA


		Accuracy ± (% of Reading + % of Range)	0.01% + 0.01%

		Resolution	1 µA

	Loop Power Supply (Loop)	Range	24V

		Maximum current	22mA
		Driving ability	no HART resistance of 1K Ω, HART resistance is 750 Ω