Hydraulic - Bench-top / Table-top Model
H6000
- Ranges: Up to 700 Bar
- Accuracy: ±0.05% of Reading
- Single / Dual Piston
- Oil operated
- Engineering Units : Bar / Kg/Cm2 / PSI.
- Adjustable Foot & Spirit Level
- Piston Calibrated thro’ “Cross Floating Techniques”
- Calibrated to Standard Gravity (Optional: Calibration to Local Gravity as per Customer’s requirement)
- Accuracies Traceable to International Standards
- Mild Steel / Non-Magnetic Stainless Steel Weight Sets
- Range: 35 / 70 / 100 / 160 / 350 / 600 / 700 Bar
- Piston: Single / Dual – Refer Table 2
- Standard Accuracy: ±0.05% of Reading
- Traceability: International Standards – Refer Table 1
- Weights: Mild Steel / Non-Magnetic Stainless Steel
- Pressure generation: Thro’ Priming Pump & Screw Ram
- Standard Corrections: Gravity: 9.80665 m/s2* / Temperature: 20°C / Air Density: 1.2 Kg/Cm2
- Weight (approx.): Instrument: 19 Kg / Weight Sets: 8 to 33 Kg – Refer Table 2
- No. of Weights: 12 to 15
- Instrument Dimensions: 530 x 325 x 230 mm (L x W x D)
- Operating Fluid: Oil
- DWTCal Software: Optional
TABLE1
Model | Accuracy | PCU | Weight Set | Certification | Remarks |
H6000 | ±0.05% of Reading | Hardened Special Steel Piston & & Matching Cylinder | Mild Steel / Non-Magnetic Stainless Steel | Overall Accuracy | Traceable to ISO/IEC 17025:2005 Accredited Calibration Lab |
TABLE2
Piston Type | Piston Model | Pressure Ranges | ||
1 / Bar | 2 / Kg/Cm2 | 3 / PSI | ||
Single | SP-35 | 0.5 to 35 | 0.5 to 35 | 10 to 500 |
Single | SP-70 | 0.5 to 70 | 0.5 to 70 | 10 to 1000 |
Single | SP-100 | 5 to 100 | 5 to 100 | 75 to 1500 |
Single | SP-160 | 5 to 160 | 5 to 160 | 75 to 2500 |
Single | SP-350 | 5 to 350 | 5 to 350 | 75 to 5000 |
Single | SP-600 | 10 to 600 | 10 to 600 | 150 to 9000 |
Single | SP-700 | 10 to 700 | 10 to 700 | 150 to 10000 |
Dual | DP-160 | 1 to 160 | 1 to 160 | 15 to 2500 |
Dual | DP-350 | 1 to 350 | 1 to 350 | 15 to 5000 |
Dual | DP-600 | 1 to 600 | 1 to 600 | 15 to 9000 |
Dual | DP-700 | 1 to 700 | 1 to 700 | 15 to 10000 |
- Basic Instrument
- Calibrated M.S. / S.S Weight Sets – Refer Table 1 & 2
- Full set of Adaptors consisting of 1/8”, 1/4″, 3/8”, 1/2″ BSP (Set of NPT Adaptors available on request)
- Operating Fluid (500 ml)
- ‘O’ Ring & Seals
- Dust Cover, Wooden Carrying Case (for Weight Sets)
- Traceable Calibration Certificate
- Instruction Manual
- Right angled Adaptor / Two Gauge Adaptor
- Conversion Weight Sets to convert from one unit of Pressure to another
- Incremental Weight Sets for smaller increments of Pressure
- DWTCal Calibration Software
- Motorized Version
- Calibration Certificate from NABL Accredited Laboratory (as per ISO/IEC 17025:2005) – Refer Table 1