Pneumatic - Bench-top / Table-top Model
P8000/P8600
- Ranges : 0.5 to 1 / 2 / 10 / 20 / 35 Bar*
- Accuracy : ±0.05% & ±0.025% of Reading
- Single Piston type
- Non-Magnetic Stainless Steel Weight Sets
- Air / Gas operated
- Engineering Units : Bar / Kg/Cm2 / PSI
- Adjustable Foot & Spirit Level
- Piston Calibrated thro’ “Cross Floating Techniques”
- Pressure generation direct via Priming Pump & Ram Screw
- Built-in / Integral (Priming) Pump
- Maximum Pressure: 7 Bar
- External Air supply required for Higher Pressures (Integrated with Pressure Gauge & Regulator)
- Accuracies Traceable to International Standards
Models | Pressure Ranges | |||
1 / Bar | 2 / Kg/Cm2 | 3 / PSI | ||
P8000-SP | P8600-SP | 0.5 to 1 (1000 mBar) | 0.5 to 1 | 2 to 15 |
P8000-SP | P8600-SP | 0.5 to 2 (2000 mBar) | 0.5 to 2 | 2 to 30 |
P8000-SP | P8600-SP | 0.2 to 10 | 0.2 to 10 | 5 to 150 |
P8000-SP | P8600-SP | 0.5 to 20 | 0.5 to 20 | 10 to 300 |
P8000-SP | P8600-SP | 0.5 to 35 | 0.5 to 35 | 10 to 500 |
External Pressure Source (for Models above 7 Bar) to be provided by customer.
- Basic Instrument
- Set of Adaptors (BSP / NPT)
- Non-Magnetic Stainless Steel Weight Sets
- Spirit Level, Dust Cover & Wooden Carrying Case (for Weight Sets)
- Pointer Puller / Punch, Spanner Set & Screw Driver
- ‘O’ Ring & Seals
- Traceable Calibration Certificate (for P8000 Series)
- Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory (for P8600 Series)
- Instruction Manual
- Two Gauge & Right angled Adaptors
- Conversion Weight Sets to convert from one unit of Pressure to another
- Incremental Weight Sets for smaller increments of Pressure
- Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory (for P8000 Series)