Hydraulic - Handheld Type
MPC-H
- Digital Pressure Indicator with matching Hydraulic Hand Pump with Vernier
- Silicon Keys
- Selectable Engineering Pressure Units
- DC Current & Voltage Measurement
- Switch Test capability & Zero Offset facility
- Loop Supply Provided
- Pressure Transducer – all Media compatible with SS316
- Low Battery Indication
- Auto Power Off
- Rugged Protection Holster
- USB Interface
- Ingress Protection Rating : IP 52
Ideal Lab / Site Tool for checking & Calibration of Hydraulic Pressure / Differential Pressure Gauges / Switches / Transmitters / Receiver Gauges / Loops etc.
- Range: 0 to 70 / 100 / 200 / 250 /350 / 700 / 1000 bar
- Accuracy: ±0.05% F.S.
- Display Resolution: Minimum 5 digits
- Display: 7 Segment FSTN (Large) Display
- Engineering Units (12): Refer Table below
- mA Input: 0 to 50 mA DC
- Volt Input: 0 to 10V DC
- Resolution for mA & Volt: 0.001
- Process Connection: ½” BSP (M)
- Over Pressure Alarm: 105% FS (Audio / Visual)
- Battery Type: 7.4 Volts Rechargeable Battery
7 Segment Classification of Engineering Units
Range (bar) | Pressure / Engineering Units – Resolution | |||||||||||
inH2O | mH2O | cmH2O | mmH2O | inHg | mmHg | Mbar | kPa | Mpa | bar | Kg/cm2 | psi | |
70 | 1 | 0.01 | 1 | — | 0.1 | 1 | 1 | 0.1 | 0.001 | 0.01 | 0.01 | 0.1 |
100 | 1 | 0.1 | — | — | 0.1 | 1 | — | 1 | 0.001 | 0.01 | 0.01 | 0.1 |
200 | 1 | 0.1 | — | — | 0.1 | — | — | 1 | 0.001 | 0.01 | 0.01 | 0.1 |
250 | — | 0.1 | — | — | 0.1 | — | — | 1 | 0.001 | 0.01 | 0.01 | 0.1 |
350 | — | 0.1 | — | — | 1 | — | — | 1 | 0.001 | 0.01 | 0.01 | 0.1 |
700 | — | 0.1 | — | — | 1 | — | — | 1 | 0.001 | 0.01 | 0.01 | 1 |
1000 | — | 1 | — | — | 1 | — | — | — | 0.01 | 0.1 | 0.1 | 1 |
- Pressure Indicator with Hand Pump
- Test Leads & Seals Kit
- Hose with End Fittings
- External Charger
- Carrying Case
- Traceable Calibration Certificate
- USB Interface
- Instruction Manual
- Set of Adaptors
BSP:
⅛” BSP(F) X ¼” BSP (M)
½” BSP(F) X ¼” BSP (M)
⅜” BSP(F) X ¼” BSP (M)
NPT:
⅛” NPT(F) X ¼” BSP (M)
¼” NPT(F) X ¼” BSP (M)
½” NPT(F) X ¼” BSP (M)
⅜” NPT(F) X ¼” BSP (M)
- ‘Calpress’ Calibration Software with Cable
- Water operated Hand Pump
- Calibration Certificates are issued in Accordance with our Scope as granted by NABL per ISO/IEC 17025:2017 Standards