Buy Pneumatic Dead Weight Tester - Nagman Instruments Consortium

P8000/P8600

Air / Gas operated
Engineering Units : bar or Kg/Cm2 or psi (Kpa & Mpa also available)
Adjustable Foot & Spirit Level
Piston Calibrated thro’ “Cross Floating Techniques”
Pressure generation direct via Priming Pump & Ram Screw
Calibrated to Standard Gravity
(Optional : Calibration to Local Gravity as per Customer’s requirement)
Non-Magnetic Stainless Steel Weight Sets
Built-in / Integral (Priming) Pump. Maximum Pressure: 7 bar
* External Air supply required for Higher Pressures (Integrated with Pressure Gauge & Regulator)

Ideal tool for Fine Increments & for Medium Volume Applications. Ensures – easy & controllable Pressure generation for Calibration of Pneumatic Digital Indicators, Manometers, Pressure Transducers / Transmitters, Pneumatic Digital Calibrators / Pressure Gauges etc.
Screw Pump with built-in Priming Pump

Model	Accuracy	PCU	Weight Set	Certification	Remarks
P8000 / P8600	±0.05% / ±0.025% of Reading	Hardened Special Steel Piston & Matching Cylinder	Non-Magnetic Stainless Steel	Overall Accuracy	Refer Table 2

Models	Pressure Ranges
Models	1 / Bar	2 / Kg/Cm²	3 / PSI	Remarks
P8000-SP	15 mBar to 1000 mBar (1 bar)	0.015 to 1	0.2 to 15	Traceable Calibration Certificate
P8000-SP	0.5 to 10 bar	0.5 to 10	10 to 150	Issued by NABL ISO/IEC 17025:2017 Accredited Lab
P8000-SP	0.5 to 20 bar	0.5 to 20	10 to 300
P8000-SP	0.5 to 35 bar	0.5 to 35	10 to 500

Models	Pressure Ranges
Models	1 / Bar	2 / Kg/Cm²	3 / PSI	Remarks
P8600-SP	15 mBar to 1000 mBar (1 bar)	0.015 to 1	0.2 to 15	Traceable Calibration Certificate
P8600-SP	0.5 to 10 bar	0.5 to 10	10 to 150	Issued by NABL ISO/IEC 17025:2017 Accredited Lab
P8600-SP	0.5 to 20 bar	0.5 to 20	10 to 300
P8600-SP	0.5 to 35 bar	0.5 to 35	10 to 500

Basic Instrument
Set of Adaptors (BSP or NPT)
BSP :
⅛” BSP(F) X ½” BSP (M)
½” BSP(F) X ½” BSP (M)
⅜” BSP(F) X ½” BSP (M)
NPT :
⅛” NPT(F) X ½” BSP (M)
¼” NPT(F) X ½” BSP (M)
½” NPT(F) X ½” BSP (M)
⅜” NPT(F) X ½” BSP (M)
Non-Magnetic Stainless Steel Weight Sets
Spirit Level, Dust Cover & Wooden Carrying Case (for Weight Sets)
Pointer Puller / Punch,
Set of Spanners & Screw Driver
‘O’ Ring & Seals
Traceable Calibration Certificate (for P8000 Series)
Calibration Certificates are issued in Accordance with our Scope as granted by NABL per ISO/IEC 17025:2017 Standards (for P8600 Series)
Instruction Manual

Two Gauge Adaptor
Right angled Adaptor
Conversion Weight Sets to convert from one unit of Pressure to another
Incremental Weight Sets for smaller increments of Pressure
Calibration Certificates are issued in Accordance with our Scope as granted by NABL per ISO/IEC 17025:2017 Standards (for P8000 Series)