- Range -10°C to 123°C
- Resolution 0.1 °C
- Accuracy ±1 °C
- Stability ±0.2 °C
- Stabilization Time 15 Minutes
- Temperature Readout °C / °F Selectable
- Well Diameter 19 mm
- Immersion Depth 100 mm
- Heating Time 10 Minutes (from Ambient to max.)
- Cooling Time 20 Minutes (from Ambient to min.)
- Interchangeable Thermowells Single Hole to suit 1/4″ & ½” Probes – Standard
- Switch Test Facility / Supply Provided / 5V DC (open)
- Power Supply 230 V AC / 50 Hz
- Basic Instrument
- Cable for Thermostat Switch Test
- Mains Cable
- Insertion Tube (to suit 1/4“ & ½” probe)
- Tool for Insertion Tube
- Spare Fuses
- Traceable Calibration certificate
- Instruction Manual
- Carrying Case
- Computer Interface
- “Caltemp” Calibration Software
- Additional Thermowells / Insertion Tubes (to choose from) :
- Single hole standard sizes to suit : 1/8”, 1/4”, 3/8”, 1/2” & 3, 4, 5, 6, 7, 8, 10, 12, 13, 15 & 17 mm probes
- Multihole (Typical) : (1×6 + 1×8), (3×6), (1×10 + 1×4) mm
- Power Supply 110 V AC, 60 Hz
- Calibration Certificates are issued in Accordance with our Scope as granted by NABL per ISO/IEC 17025:2017 Standards