Portable Dual Pressure Calibrator - Nagman Instruments Consortium

Heavy Duty - Dual - Pneumatic & Hydraulic - Table-top / Bench-top

PPC-D+

Light Weight & Compact
Unique Combo 2-in-1 Space Saver
Housed in Rugged Carry Case
Automatic Temperature Compensation (0 to 50°C)
4.3” Colour Display with Touch Screen
Selectable Engineering Pressure Units
DC Current & Voltage Measurement
Switch Test capability & Zero Offset facility
Audio & Visual Alarms for Over Pressure
Pressure Transducer – all Media compatible with SS316
Rechargeable Battery with ‘Low Battery’ indication
Digital Pressure Indicator with 2 integral / built-in Pumps & Fine
Adjustment Vernier
Ingress Protection IP 65

Specifications

Ideal Lab / Site Tool for checking & Calibration of Pressure / Differential Pressure Gauges / Transmitters / Indicators / Loops, Pneumatic Receiver Gauges, Control Valves, Pressure / Transducers etc.- in Industrial & Marine Applications

Ranges: -0.85 bar Vacuum to 20 bar (Pneumatic) & 0 to 400 bar (Hydraulic) (Oil)
Accuracy: ±0.025% F.S.
Temperature Compensation: 0 to 50°C (Automatic)
Display Resolution: Minimum 5 digits
Display: 4.3” Colour Display with Touch Screen
Engineering Units: Kg/cm2, bar, mbar, PSI, mH2O, mmH2O, cmH2O, inH2O, ftH2O, mmHg, inHg, Atm, Mpa, Kpa, Pa
mA Input: 4 – 20 mA, 0 – 50 mA (Active Loop) & 0 – 25 mA (Passive Loop); Loop Supply Provided
Volt Input: 0 to 10V DC
Resolution (mA / V): 0.001
Pressure Switch Test: Maximum 5V DC (approx.)
Medium: Air & Oil (Water : optional) #
Over Pressure Alarm: 105% FS (Audio / Visual)
Instrument Dimension: 425 x 335 x 200 mm (L x B x H)
Instrument Weight (approx.): 10 Kg.

Std. Inclusions

Digital Pressure Calibrator
Hoses with End Fitting (Pneumatic & Hydraulic)
Test Leads & Seals Kit
Oil : 250 ml
External Charger
Computer Interface
Instruction Manual
Calibration Certificates are issued in Accordance with our Scope as granted by NABL per ISO/IEC 17025:2017 Standards
Set of Adaptors
BSP
⅛” BSP(F) X ¼” BSP (M)
½” BSP(F) X ¼” BSP (M)
⅜” BSP(F) X ¼” BSP (M)
NPT
⅛” NPT(F) X ¼” BSP (M)
¼” NPT(F) X ¼” BSP (M)
½” NPT(F) X ¼” BSP (M)
⅜” NPT(F) X ¼” BSP (M)