Digital Pressure Calibrators - Nagman Instruments Consortium

Pneumatic - Handheld Type

MPC-P+

Digital Pressure Indicator with matching Pneumatic Hand Pump with Vernier
Silicon Keys
Selectable Engineering Pressure Units
DC Current & Voltage Measurement
Switch Test capability & Zero Offset facility
Loop Supply Provided
Pressure Transducer – all Media compatible with SS316
Low Battery Indication
Auto Power Off
Rugged Protection Holster
USB Interface
Ingress Protection Rating : IP 52

Specifications

Ideal Lab / Site Tool for checking & Calibration of Pneumatic Pressure / Differential Pressure Gauges / Switches / Transmitters / Receiver Gauges / Loops etc.

Ranges: -0.90 to 2 / 10 / 20 / 35 / 40 / 60 bar
Accuracy: ±0.025% F.S.
Display Resolution: Minimum 5 digits
Display: 7 Segment FSTN (Large) Display
Engineering Units (12): Refer Table below
mA Input: 0 to 50 mA DC
Volt Input: 0 – 10V
Resolution for mA & Volt: 0.001
Process Connection: ½” BSP (M)
Over Pressure Alarm: 105% FS (Audio / Visual)
Battery Type: 7.4 Volts Rechargeable Battery

7 Segment Classification of Engineering Units

Range (bar)	Pressure / Engineering Units – Resolution
Range (bar)	inH₂O	mH₂O	cmH₂O	mmH₂O	inHg	mmHg	Mbar	kPa	Mpa	bar	Kg/cm²	psi
2	0.01	0.001	0.1	1	0.001	0.1	0.1	0.01	0.0001	0.0001	0.0001	0.001
10	0.1	0.01	1	—	0.01	0.1	1	0.1	0.0001	0.001	0.001	0.01
20	0.1	0.01	1	—	0.01	1	1	0.1	0.0001	0.001	0.001	0.01
35 ~ 60	1	0.01	1	—	0.1	1	1	0.1	0.0001	0.001	0.001	0.01

Std. Inclusions

Pressure Indicator with Hand Pump
Test Leads & Seals Kit
Hose with End Fittings
External Charger
Carrying Case
USB Interface & Cable
‘Calpress’ Calibration Software with Cable
Instruction Manual
Calibration Certificates are issued in Accordance with our Scope as granted by NABL per ISO/IEC 17025:2017 Standards
 Set of Adaptors
⅛” BSP(F) X ¼” BSP (M)
½” BSP(F) X ¼” BSP (M) BSP
⅜” BSP(F) X ¼” BSP (M)
⅛” NPT(F) X ¼” BSP (M)
¼” NPT(F) X ¼” BSP (M) NPT
½” NPT(F) X ¼” BSP (M)
⅜” NPT(F) X ¼” BSP (M)